Skip the top links
Sleek Socket

Which way up

Covers cut for a ground pin below the slots

The usual American layout. If the round hole on your outlet sits under the two flat slots, everything on this page is cut the right way up for it.

What it means

What the pin below the slots tells you

Ground pin down

We cut the plate so the cord leaves the bottom edge and the printing on the face reads level. On an outlet wired this way the flat slots take the blades first, and the round hole stays clear underneath. Nothing about the cover changes how the outlet works; it only sits over the face of it.

Ground pin up

If the round hole on your wall sits above the slots instead, this shelf is not the one. We cut a separate plate for that layout.

The other shelf, 6 pieces

Side by side

Cord and sockets, cut this way

Flat cord on this shelf runs 3 to 8 ft. Measure from the outlet to where the plug has to land before choosing.

Every piece cut ground pin down
PieceGround pinFlat cordSockets
3-Foot Outlet Concealer with 3-Outlet StripGround pin down3 ft3
8-Foot Outlet Concealer with 3-Outlet StripGround pin down8 ft3
6-Foot Concealer with 6-Outlet Surge StripGround pin down6 ft6
8-Foot Two-Cord Outlet ConcealerGround pin down8 ft2
3-Foot Two-Cord Outlet ConcealerGround pin down3 ft3
8-Foot Child-Proof Concealer with Cord ClipsGround pin down8 ft3
Smart Wi-Fi Outlet Concealer with App ControlGround pin down5 ft6
6-Foot Angled C7 TV Cord KitGround pin down6 ft3
Two-Gang Concealer, Light Switch on the LeftGround pin down8 ft3
Two-Gang Concealer, Light Switch on the RightGround pin down8 ft3
6-Foot C7 TV Cord Kit for Standard OutletsGround pin down6 ft2
6-Foot Polarized C7 TV Cord KitGround pin down6 ft3
5-Foot Non-Polarized C7 TV Cord KitGround pin down5 ft3
6-Foot Non-Polarized C7 TV Cord KitGround pin down6 ft3

Wall checked, still choosing?

The questions run through the spot on the wall, the cord length and the far end, and leave only what fits.