Under the television

6-Foot Polarized C7 TV Cord Kit

A thin replacement power cord for a television that lets the screen push flat to the wall, paired with a small floor strip for three other devices.

$21.95at our retail partner

5.0 1 rating

Check it against your wall

A wall mounted television often sits an inch out from the drywall because its thick factory plug is trapped behind the frame. This kit replaces that original cord entirely. The flat plate covers the receptacle, and the line runs down the wall to a small three outlet block for your components below.

Where it runs: Under the television
Ground pin: Ground pin down
Cord length: 6 ft
Sockets on the strip: 3
Far end: C7 appliance plug
Wall box: Single gang
Rated for: 125 volts

Matching standard wall outlets

This model fits an ordinary duplex outlet where the round ground pin sits at the bottom. The prongs on our plate press into the upper receptacle like any normal plug, hiding the whole face without removing wall plates or turning off breakers.

Figure eight television connection

The top cord terminates in the flat figure eight shape found on many flat panels, sound bars, and streaming boxes. This end is polarized with one side slightly wider than the other, so check the socket on your screen before setting it up.

Mounting along the baseboard

We include removable adhesive strips and clips in the box so the flat cable stays firmly against paint or trim. The run is six feet from the wall plate down to the floor, giving you enough slack to route around a media console.

Extra outlets for components

Instead of losing your wall plug to the television, the line ends in a small block that accepts three household plugs. Your game console, media box, and speakers can all draw power near the floor without stretching cords up the wall.

$21.956-Foot Polarized C7 TV Cord Kit

Cut the same way