Under the television

5-Foot Angled C7 TV Cord Kit

A thin plate that covers an upright duplex outlet, running power up to a flat screen television and down to three floor outlets.

$21.95as listed when built

Check it against your wall

A television pushed back toward the wall usually stops on its own thick plug. We mold this plate to sit flat over an upright outlet, run power straight into the television with a replacement cord, and drop three extra outlets near the baseboard.

Where it runs: Under the television
Ground pin: Ground pin down
Cord length: 5 ft
Sockets on the strip: 3
Far end: C7 appliance plug
Wall box: Single gang
Rated for: 125 volts

Upright duplex outlet fit

This model fits an outlet hung the standard way, with the round ground hole underneath the two vertical slots. The plate plugs directly into the top receptacle and covers the entire wall plate.

Figure eight television connector

The cord replaces the original power cord for the screen. It terminates in an angled, symmetrical figure eight shape with two rounded lobes, which plugs in either way and sits flat against the back of the set.

Power strip at baseboard

Along with powering the television, the flat cord carries current down to a small strip with three outlets. That leaves room for a streaming box, a sound bar, or a lamp on the media console.

Removable adhesive clips

The flat cord routes straight down the wall surface. We include removable adhesive strips and clips in the box to hold the run flat against drywall, provided the paint is clean and dry before sticking.

$21.955-Foot Angled C7 TV Cord Kit

Cut the same way