Skip the top links
Sleek Socket

Where it runs

Behind the couch

A plate this thin lets a couch or a headboard sit flush again. The plug no longer stands out from the wall, and the flat cord leaves along the baseboard instead of bending behind the frame.

Which way up

The ground pin on this shelf

On this shelf 4 are cut for an outlet with the round hole under the slots and 2 for one with the hole above. Look at the wall before choosing.

How to read the outlet

Ground pin down

The round hole sits under the two flat slots. This is how most outlets are set in a wall, so the plate reads right way up.

Everything cut this way, 14 pieces

Ground pin up

The round hole sits above the slots. Older rooms and remodels are often wired this way, and a plate cut for the usual layout would hang upside down.

Everything cut this way, 6 pieces

Side by side

Cord and sockets on this shelf

Flat cord here runs 3 to 8 ft. Measure from the outlet to where the plug has to land, then add a little slack.

Every piece on this shelf
PieceGround pinFlat cordSockets
3-Foot Outlet Concealer with 3-Outlet StripGround pin down3 ft3
8-Foot Outlet Concealer with 3-Outlet StripGround pin down8 ft3
8-Foot Outlet Concealer for Inverted OutletsGround pin up8 ft3
8-Foot Two-Cord Outlet ConcealerGround pin down8 ft2
3-Foot Two-Cord Outlet ConcealerGround pin down3 ft3
3-Foot Outlet Concealer for Inverted OutletsGround pin up3 ft2

Still between two pieces?

The questions run through the wall, the ground pin, the cord length and the far end, and leave only what fits.