Skip the top links
Sleek Socket

Where it runs

Desk and bench

Short runs for a desk, a bench or a console, where the outlet is close to the top and the cord has to reach a strip rather than cross a room.

Which way up

The ground pin on this shelf

On this shelf 2 are cut for an outlet with the round hole under the slots and 1 for one with the hole above. Look at the wall before choosing.

How to read the outlet

Ground pin down

The round hole sits under the two flat slots. This is how most outlets are set in a wall, so the plate reads right way up.

Everything cut this way, 14 pieces

Ground pin up

The round hole sits above the slots. Older rooms and remodels are often wired this way, and a plate cut for the usual layout would hang upside down.

Everything cut this way, 6 pieces

Side by side

Cord and sockets on this shelf

Flat cord here runs 5 to 6 ft. Measure from the outlet to where the plug has to land, then add a little slack.

Every piece on this shelf
PieceGround pinFlat cordSockets
6-Foot Concealer with 6-Outlet Surge StripGround pin down6 ft6
6-Foot Surge Concealer for Inverted OutletsGround pin up6 ft6
Smart Wi-Fi Outlet Concealer with App ControlGround pin down5 ft6

Still between two pieces?

The questions run through the wall, the ground pin, the cord length and the far end, and leave only what fits.