Under the television

5-Foot Polarized C7 TV Cord Kit

A thin plate that covers your duplex outlet and runs a flat cord up to your television, replacing the original power lead so the set sits flush.

$21.95as listed when built

5.0 1 rating

Check it against your wall

A wall mounted television often stays pushed out because its own plug hits the drywall behind it. We molded this plate to plug into the upper receptacle and cover the entire face, routing the power through a flat cord that stays close to baseboards and plaster. The television can sit back where it belongs.

Where it runs: Under the television
Ground pin: Ground pin down
Cord length: 5 ft
Sockets on the strip: 3
Far end: C7 appliance plug
Wall box: Single gang
Rated for: 125 volts

Matching standard duplex outlets

Look at your wall plate before you start. This version fits an ordinary duplex outlet where the round ground opening sits beneath the two vertical slots. It pushes directly into the upper socket without screws or wiring work.

The figure eight connector

The far end replaces the power cord that came with the television. It uses the flat figure eight shape with two rounded lobes side by side, keyed so it plugs in one way round into most flat panels and streaming boxes.

Three outlets where needed

Besides feeding the television, the flat cord drops down to a small strip with three outlets on it. Media players, sound hardware and table lamps can plug into the block instead of crowding the original wall plate.

Adhesive clips along the run

We include removable double sided adhesive strips and small clips in the box. Press them against clean paint to route the five foot white cord down the wall or along the baseboard, keeping the line neat and flat.

$21.955-Foot Polarized C7 TV Cord Kit

Cut the same way