Skip the top links
Sleek Socket

Where it runs

Switches and plates

Wider covers for a two gang box, where a switch shares the plate with the outlet and an ordinary cover would not reach.

Which way up

The ground pin on this shelf

Everything on this shelf is cut for an outlet with the round hole under the slots. Look at the wall before choosing.

How to read the outlet

Ground pin down

The round hole sits under the two flat slots. This is how most outlets are set in a wall, so the plate reads right way up.

Everything cut this way, 14 pieces

Ground pin up

The round hole sits above the slots. Older rooms and remodels are often wired this way, and a plate cut for the usual layout would hang upside down.

Everything cut this way, 6 pieces

Side by side

Cord and sockets on this shelf

Flat cord here runs 8 ft. Measure from the outlet to where the plug has to land, then add a little slack.

Every piece on this shelf
PieceGround pinFlat cordSockets
Two-Gang Concealer, Light Switch on the LeftGround pin down8 ft3
Two-Gang Concealer, Light Switch on the RightGround pin down8 ft3

Still between two pieces?

The questions run through the wall, the ground pin, the cord length and the far end, and leave only what fits.