Under the television

5-Foot Polarized C7 TV Cord Kit for Inverted Outlets

A thin replacement power cord for a mounted television on an inverted outlet, with a small strip at the end for other components.

$21.95as listed when built

5.0 1 rating

Check it against your wall

When an outlet is installed with the round ground pin over the slots, our standard plate will not hang right. We molded this plate for that inverted wall plug. It covers the outlet, routes power up to the screen, and brings three extra plugs down where you can use them.

Where it runs: Under the television
Ground pin: Ground pin up
Cord length: 5 ft
Sockets on the strip: 3
Far end: C7 appliance plug
Wall box: Single gang
Rated for: 125 volts

Built for inverted outlets

Look at your wall plate before you begin. If the round ground hole sits over the two flat slots, this is the layout we built this plate to fit. It plugs straight into the top half of that upside down duplex.

Replaces the television cable

One branch of this flat cord plugs straight into your set. The end matches the small figure eight socket found on many flat screens, with one side squared off so it only inserts one way. Check the back of your set first.

Extra plugs at floor level

You do not lose the outlet behind the set. The cord runs five feet down the baseboard to a small power strip with three places to plug in media boxes, streaming sticks, or game consoles.

Removable wall clips

The kit includes removable adhesive strips and clips to hold the flat line against your painted drywall. Clean the baseboard or wall first, press the adhesive down, and route the cord along the trim without opening any walls.

$21.955-Foot Polarized C7 TV Cord Kit for Inverted Outlets

Cut the same way