Under the television

5-Foot Angled C7 TV Cord Kit for Inverted Outlets

A thin replacement cord and cover plate for mounted televisions wired to an inverted wall outlet with the round hole up.

$21.95as listed when built

Check it against your wall

Some wall outlets are hung with the ground hole on top, which turns standard concealer plugs upside down. We mold this plate for those upside down receptacles. It plugs into the upper socket, drops a flat cord down the wall, and supplies both a television lead and a small floor strip.

Where it runs: Under the television
Ground pin: Ground pin up
Cord length: 5 ft
Sockets on the strip: 3
Far end: C7 appliance plug
Wall box: Single gang
Rated for: 125 volts

Inverted outlet fit

Look at the wall receptacle first. If the round ground hole sits above the two vertical slots, this is the version you want. It keeps the flat cord running downward rather than shooting toward the ceiling.

Figure eight television plug

The far end replaces the power lead on your television. It has the flat figure eight shape with two rounded sides, molded at an angle so the screen can sit tight back toward the mount.

Power strip included

The run finishes at a small block with three receptacles for streaming sticks, players, or sound bars. You gain extra places to plug gear in right where the media shelf actually sits.

Adhesive wall channels

The cord runs along the baseboard or behind the stand using removable double sided adhesive strips and clips. Wipe the drywall clean and press them on; no screwdrivers or wall cutting needed.

$21.955-Foot Angled C7 TV Cord Kit for Inverted Outlets

Cut the same way