Cable and data jacks
Coaxial and Ethernet Cable Concealer Kit
A thin two piece cover for the threaded cable jack on your wall, turned sideways so a stiff lead stops holding your television off the plaster.
A stiff cable lead tends to stand straight out of the drywall, right where a media console or a low desk needs to sit. This thin cover snaps together over that connection and turns the line flat against the wall immediately. It handles network lines beside the cable lead, though it carries no household current.
- Where it runs
- Cable and data jacks
- Wall box
- Single gang
Right angle adapter
A stiff television cable resists sharp bends. The right angle piece inside this box turns that threaded connection sideways at the wall surface, so a heavy credenza stops crushing the lead behind it.
Two part snap cover
The cover mounts with the small screws in the box and snaps together over the jack. It leaves a flat front facing the room, letting furniture sit back against the baseboard.
Network line couplers
If your wall jack carries internet data alongside the television lead, the box includes a pair of straight through network couplers. Both lines pass through the one plate.
Clips in the box
The adhesive strips and clips hold the low voltage run against painted drywall or baseboard trim. Wipe the wall clean first so the adhesive gets a firm grip.